Xn Patented Product 126213-50-1 50kgs/iron Drum With Plastic Lining
Chemical Product and Company Identification
Name: 3,4-ethylenedioxy thiophene, 99.90+%
Synonyms: 2,3-Dihydrothieno[3,4-b]-1,4-dioxin; EDT;
Company Identification:Beili Chemicals (Zhangjiagang) Co., Ltd.
Composition, Information on Ingredients
Substance: 3,4-ethylenedioxy thiophene
% content: 99.90+
CAS Number: 126213-50-1
Hazard Symbols: Xn
|Water||≤0.1%||Quality standard||meets company specification|
Handling and Storage
Handling: Directions for Safe Handling: Do not breathe vapor. Avoid
contact with eyes, skin, and clothing. Avoid prolonged or repeated
Storage: Conditions of Storage: Store in a cool dry place.Keep
container tightly closed in a dry and well-ventilated place.
Containers which are opened must be carefully resealed and kept
upright to prevent leakage.
Recommended storage temperature: 2 - 8 °C
Exposure Controls, Personal Protection
Engineering Controls: Use only in a chemical fume hood. Safety
shower and eye bath.
Personal Protective Equipment
Eyes: Wear chemical goggles. Wear safety glasses and chemical
goggles if splashing is possible.
Skin: Wear appropriate protective gloves and clothing to prevent
Clothing: Wear appropriate protective clothing to minimize contact
Respirators: A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN
149 must be followed whenever workplace conditions warrant a
respirator's use. Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the positive pressure
mode with emergency escape provisions.
1. the application in solid electrolytic capacitor
The electrolytic capacitor using PEDT as the negative pole is
called solid conductive polymer capacitor. Its conductivity is 100S
/ CM, which is 100 times of TCNQ salt, 10,000 times of
electrolyte.The security of solid conductive polymer capacitor is
better, when it is in the high Temperature, the electrolyte is just
melting but can not explode.
Compared with the traditional manganese dioxide solid electrolytic
transistor electrode, the solid electrolytic capacitor electrode
made by PEDT has the following characteristic.
2.the application in Antistatic coating
Antistatic coating is the most important application of PEDT.
Compared with other conductive polymer, PEDT/PSS film is not easy
to hydrolysis, and it is light fastness and is against high
temperature. This kind of characteristic just satisfy the request
of anti- static coating. In addition, the resistance of PEDT
coating may reach 200 ~ 107 Omega /m2.Therefore, the anti-static
coating mixed with PEDT has great potential development
3.the super material of capacitor electrode
PEDT as a new type of storage capacitor materials. The present
experimental data indicate that the capacity of super capacitor
using PEDT as electrode can achieve 3000 F. Recent research has
concentrated on improving the polymer discharge performance, cycle
life and thermal stability and so on.
4.The basic material of organic electroluminescence (OEL) display
Organic electroluminescence (OEL) display technology is a quite hot
topic in recent years. PEDT can be as the hole injection layer of
PLED, also can replace indium oxide or Tin oxide(ITO) conductive
layer, therefore PEDT is the most important polymers of PLED
technology in the future.
Moreover, as the fine characteristics of PEDT, it has broad
applying prospects in Via PCB coating, sensors, rechargeable
batteries, photodiode, corrosion protection.
PEDT and its derivatives are kinds of the polymer with good
conductivity and high stability, It has been successfully applied
in solid capacitors, antistatic coatings, organic
electroluminescence and many other electronics industry area in
recent years. It brought to the rapid development of conductive
polymer, representing the development trend of conductive polymers.
It has become the most important material of electronics and
information industry now.
Store in a cool dry place.Keep container tightly closed in a dry
and well-ventilated place. Containers which are opened must be
carefully resealed and kept upright to prevent leakage.
Recommended storage temperature: 2 - 8 °C
Avoid contact with skin and eyes. Wear suitable protective
Typical bulk packaging includes 50kgs/iron drum with plastic
lining,also can be packaged according to customer requirements.
Excellence in product packaging will be a good protection for
products, reducing the damage in the transport process to ensure
that products safely reach our customers.
BeiLi is a leading manufacturer of 3,4-ethylenedioxythiophene(EDOT)
126213-50-1 which has the patented technology for producing high
quality EDOT. We can provide our customers with quality
3,4-ethylenedioxythiophene(EDOT) 126213-50-1. Regarding purity and
the quantity you require, these two factors may affect the price.
If you require any further information about
3,4-ethylenedioxythiophene(EDOT) 126213-50-1, please do not
hesitate to contact our experienced staff.